Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Toyota Corolla?

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Light bulb

To replace the front headlamp bulb on a Toyota Corolla, open the bonnet to remove the screws and rivets securing the corresponding headlamp. Once these fasteners are removed, you can move the headlamp to extract the bulb from its housing and disconnect it from the connector. Connect the new bulb to the connector and insert it back into its housing. At this point, refit the front headlamp using the appropriate screws and rivets at the top.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Toyota Corolla
How to replace the headlight bulb of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the front headlight bulb of your new Toyota Corolla is really very simple. To complete the operation in question, just read the following g…
How to Replace the Headlamp Bulb on a Toyota Corolla
How to Replace the Headlamp Bulb on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) This guide briefly explains how to remove and replace the dipped beam bulb of the front headlamp on a Toyota Corolla. First, open the bonnet of your …
How to replace the headlight bulb of the 2016 Toyota Corolla.
How to replace the headlight bulb of the 2016 Toyota Corolla.
Toyota Corolla (2013-2019 / MK 4, E170, E160) To complete the replacement of the headlight bulb of your Toyota Corolla (year 2016) you must follow the following steps. First of all, the car must …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos