Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on a Toyota Corolla

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Headlight bulb

This guide briefly explains how to remove and replace the dipped beam bulb of the front headlamp on a Toyota Corolla. First, open the bonnet of your car and start by removing the plastic cover protecting the bulbs at the back of the unit; then, unclip the metal spring and disconnect the electrical connector to remove the bulb from the light assembly, as shown in the video. At this point, install the new dipped beam bulb of the correct type (in this case, H7); check its operation and refit everything!

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Toyota Corolla
How to replace the headlight bulb of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the front headlight bulb of your new Toyota Corolla is really very simple. To complete the operation in question, just read the following g…
How to Replace the Front Headlight Bulb in a Toyota Corolla?
How to Replace the Front Headlight Bulb in a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) Replacing the front headlight bulb in the Toyota Corolla is a very simple task; let’s see how to proceed in this video. First, ensure the key is not …
Removing Headlight Bulbs on a Toyota Corolla
Removing Headlight Bulbs on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Are the front headlight bulbs damaged? How to replace them from inside the front headlight of the Corolla. Locate the inspection cap of the headlight…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos