Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on the Toyota Corolla

Model: Toyota Corolla MK 1 - Years 1995-2002
Part: Light bulb

To replace the front headlight bulb on the Toyota Corolla, open the bonnet to access the engine and grasp the connector connected to the bulb at the back of the headlight. By rotating the connector, you can extract the bulb from its housing and disconnect it from the connector. Once the old bulb is removed, connect a new one and insert it into its housing, rotating it to secure it. After installation, check that the device functions correctly.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Toyota Corolla?
How to Replace the Front Headlamp Bulb on a Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To replace the front headlamp bulb on a Toyota Corolla, open the bonnet to remove the screws and rivets securing the corresponding headlamp. Once the…
How to replace the headlight bulb of the Toyota Corolla
How to replace the headlight bulb of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the front headlight bulb of your new Toyota Corolla is really very simple. To complete the operation in question, just read the following g…
Removing Headlight Bulbs on a Toyota Corolla
Removing Headlight Bulbs on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Are the front headlight bulbs damaged? How to replace them from inside the front headlight of the Corolla. Locate the inspection cap of the headlight…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos