Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp on a Toyota Corolla?

Model: Toyota Corolla MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Headlight

See other generations:
Video tutorial

To replace the front headlamp on a Toyota Corolla, open the bonnet to access the screws securing it from the top. Once the screws at the top of the unit are loosened, unscrew those located on the side of the piece, completely removing them as well. At this point, the headlamp can be disengaged from its housing, allowing you to disconnect the connector at the rear.

Now, connect the new connector and refit the headlamp using the appropriate screws.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Toyota Corolla?
How to Replace the Front Headlamp Bulb on a Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To replace the front headlamp bulb on a Toyota Corolla, open the bonnet to remove the screws and rivets securing the corresponding headlamp. Once the…
How to Replace the Front Headlight on the Toyota Corolla
How to Replace the Front Headlight on the Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) To replace the front headlight bulb on the Toyota Corolla, open the bonnet to access the engine and grasp the connector connected to the bulb at the …
How to replace the headlight bulb of the Toyota Corolla
How to replace the headlight bulb of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the front headlight bulb of your new Toyota Corolla is really very simple. To complete the operation in question, just read the following g…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos