Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the front headlight bulb of your new Toyota Corolla is really very simple. To complete the operation in question, just read the following guide and follow all the steps described.

First of all, make sure you have a new bulb that is perfectly compatible with your Toyota Corolla, then lift the front hood of the car and proceed with the removal of the bulb holder located in the rear area of the headlight. Once you have done this, replace the faulty bulb with the new one and the procedure is successfully completed.


Posted on 7 February 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Toyota Corolla?
How to Replace the Front Headlamp Bulb on a Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To replace the front headlamp bulb on a Toyota Corolla, open the bonnet to remove the screws and rivets securing the corresponding headlamp. Once the…
How to Replace the Front Headlight on the Toyota Corolla
How to Replace the Front Headlight on the Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) To replace the front headlight bulb on the Toyota Corolla, open the bonnet to access the engine and grasp the connector connected to the bulb at the …
How to Replace the Headlamp Bulb on a Toyota Corolla
How to Replace the Headlamp Bulb on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) This guide briefly explains how to remove and replace the dipped beam bulb of the front headlamp on a Toyota Corolla. First, open the bonnet of your …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos