Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlamp Bulbs on Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Replace the front headlamp bulbs on a Toyota Corolla. Lift the bonnet and secure it. Remove the plastic rivets from the cover above the headlamps, then take off the cover.

Remove the inspection cap from the rear of the headlamp. Pull out the bulb holder from inside the headlamp and extract the damaged bulbs using a screwdriver.

Install the new bulbs (ensuring they are the correct type and size) and insert the bulb holder back into the headlamp housing. Refit the plastic cover over the front headlamps.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Headlight Bulb Replacement for Toyota Corolla
Headlight Bulb Replacement for Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Are the headlight bulbs damaged? Let’s look at removing the front headlight bulbs from a Corolla. Lift the front bonnet of the car and secure it. Rem…
Removing Headlight Bulbs on a Toyota Corolla
Removing Headlight Bulbs on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Are the front headlight bulbs damaged? How to replace them from inside the front headlight of the Corolla. Locate the inspection cap of the headlight…
How to replace the headlights bulbs in the Toyota Corolla?
How to replace the headlights bulbs in the Toyota Corolla?
Toyota Corolla (2013-2019 / E170, MK 4, E160) In this tutorial we can see how to replace the front headlight bulbs in the Toyota Corolla, an extremely simple and quick operation. First of all, ma…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos