Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Toyota Corolla.

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

In this guide, we will see step-by-step instructions on how to disassemble and replace the front bumper of the Toyota Corolla. First, let's open the car's hood and start unscrewing all the fastening screws we find on the upper and lower parts of the bumper; then we unscrew the additional screws located on both sides of the front wheel wells, gently detaching the bumper until we completely remove it, as shown in the video.

At this point, if necessary, we will replace the bumper with the new one, securing it properly with all the screws and clips.


Posted on 14 December 2025 by ScegliAuto


Related tutorials

How to remove the rear bumper from a Toyota Corolla
How to remove the rear bumper from a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…
Removing and Replacing the Front Bumper on Toyota Corolla
Removing and Replacing the Front Bumper on Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) This guide will show you how to remove and replace the front bumper on a Toyota Corolla, following the instructions below. First, open the bonnet of …
How to Remove the Front Bumper of the Toyota Corolla
How to Remove the Front Bumper of the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Today, learn how to remove the front bumper of a vehicle quickly and easily. To remove the front bumper on a Toyota Corolla produced from 2006 to 201…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos