Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of a Toyota Corolla SE Mk5

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Front bumper

This guide shows how to remove the front bumper of the Toyota Corolla SE Mk5. The first step is to remove the plastic cover of the radiator by acting on the plastic clips. Remove the fixing clips and screws from the wheel arch on both sides; at this stage, you can either completely remove the front wheels or turn them for more working space. Remove the upper fixing screws of the bumper located at the top of the radiator, the screws at the bottom of the vehicle, and the lower engine cover. Disconnect the front sensor connector before fully detaching the bumper. At this point, firmly grasp the bumper and pull it away from the fixing clips.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper from a Toyota Corolla
How to remove the rear bumper from a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…
Removing and Replacing the Front Bumper on Toyota Corolla
Removing and Replacing the Front Bumper on Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) This guide will show you how to remove and replace the front bumper on a Toyota Corolla, following the instructions below. First, open the bonnet of …
How to Remove the Front Bumper of the Toyota Corolla
How to Remove the Front Bumper of the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Today, learn how to remove the front bumper of a vehicle quickly and easily. To remove the front bumper on a Toyota Corolla produced from 2006 to 201…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos