|
Do it yourself
| |||
| ||||
Replacing the Starter Motor on a Toyota Corolla 4-4D MK2
Model: Toyota Corolla
MK 2
- Years 2000-2007
Let's see how to replace the starter motor on the Toyota Corolla MK2: you can find it on auto-doc for £75.30 plus £9.95 delivery. First, remove the engine cover; there are only 4 screws. Next, take out the water reservoir, which is also held by just two screws and is clipped in. Then, remove the battery and its base. The vehicle shown has a cone air filter, which also needs to be removed but is quite simple to take off; for those with the original filter box, just remove the bolts around it and take it out. First, remove the air filter and then the battery. After disassembling these components, you will have better access to the starter motor. Now, remove the U-shaped pipe next to it by first taking off the bracket that holds it in place. Be careful as it is under pressure. This allows you to disconnect the connector going to the starter motor. Now, unscrew the two bolts highlighted in the video to remove the starter motor from its housing. You may need to move the clutch pedal pipe for easier access. Finally, remove the part. Refit the starter motor in its place and reassemble all the parts in reverse order. Job done.
Updated on 29 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Corolla
(2006-2013 /
MK 3)
The instructions in this guide will show us how to disassemble and replace the starter motor of the Toyota Corolla Verso. First, we open the hood and…
Toyota Corolla
(2000-2007 /
MK 2)
This guide covers the removal of the starter motor on a Toyota Corolla. Lift the car with a jack or column lift to access the piece. Before removing …
Toyota Corolla
(2000-2007 /
MK 2)
The following steps will show us how to disassemble and replace the starter motor of the Toyota Corolla with VVT-I gasoline engine, as well as the Co…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.126
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |