Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on the Toyota Corolla MK4

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

In this video tutorial, we will see the main steps to perform routine maintenance by changing the oil on the fourth-generation Toyota Corolla, in simple and quick steps. First, lift the vehicle and use a socket spanner to undo the oil drain bolt for drainage; wait about ten minutes before refitting the bolt.

Next, undo and remove the oil filter located right next to it, using the appropriate filter wrench; all that’s left is to pour in the new engine oil (in this case, a 0W20).


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the Toyota Corolla VVT-I
How to Replace the Engine Oil and Oil Filter on the Toyota Corolla VVT-I
Toyota Corolla (2000-2007 / MK 2) Today's DIY steps will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Toyota Corolla VVT…
How to Change the Oil and Oil Filter in a Toyota Corolla
How to Change the Oil and Oil Filter in a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Here are the steps on how to change the oil and oil filter in a Toyota Corolla. The steps are very simple and quite similar to other vehicles. First,…
How to Reset Oil Warning Light on Toyota Corolla Verso
How to Reset Oil Warning Light on Toyota Corolla Verso
Toyota Corolla (2013-2019 / E160, E170, MK 4) Resetting the oil warning light on a Toyota Corolla is a simple and quick operation to perform independently after replacing the engine oil and oil f…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos