Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil on Corolla

Model: Toyota Corolla MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Engine oil

See other generations:
Video tutorial

How to replace the engine oil on the first series Toyota Corolla? Lift the car with a jack to access underneath the vehicle. To change the engine oil, you need to remove the bolt located on the oil sump using a socket spanner.

Once the bolt is removed, allow the fluid to drain into a container. Prepare to refit the bolt with the socket spanner, then top up with the suitable oil for the Corolla engine: use a funnel to pour the oil into the engine.

Lower the car and test the operation of all parts.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Change the Oil in a Toyota Corolla
How to Change the Oil in a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) To change the oil in your Toyota Corolla, the steps are very simple. First, raise the car on ramps to access the underside. Next, locate the oil sump…
How to Change the Oil and Oil Filter in a Toyota Corolla
How to Change the Oil and Oil Filter in a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Here are the steps on how to change the oil and oil filter in a Toyota Corolla. The steps are very simple and quite similar to other vehicles. First,…
How to Reset the Oil Light on a Toyota Corolla
How to Reset the Oil Light on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) If you have just changed the engine oil in your Toyota Corolla but do not know how to reset the warning light, simply follow the instructions in this…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos