Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in My Toyota Corolla

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Car stereo

See other generations:
Video tutorial

To replace the radio in your Toyota Corolla, you will not need any special tools, and it is a task you can easily perform in your garage. First, remove the cover under the radio where the air controls are (do this very gently using a plastic lever).

Similarly, detach the trim around the stereo (where the air vents are located on the sides). Now, using a screwdriver, unscrew the securing screws on either side of the radio.

Pull the radio out with your hands and disconnect the cables (power and antenna). Take the new radio, connect the electrical terminals, and fit it back into the dashboard.

Once installed, turn it on and test its functionality.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Seat from My Toyota Corolla?
How to Remove the Front Seat from My Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) This short video shows how to remove the front seats from a Toyota Corolla in a few simple steps. First, open the bonnet and disconnect the battery. …
Removing the Radio from the Dashboard of a Toyota Corolla
Removing the Radio from the Dashboard of a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) To remove the radio from a Toyota Corolla, see how to take it out from inside the car's dashboard. Remove the cover under the radio where the air kno…
How to replace the car radio in the Toyota Corolla?
How to replace the car radio in the Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) In this tutorial, we will see how to replace the car radio in a Toyota Corolla, a very simple and quick operation. First of all, let's make sure that…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos