Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Toyota Corolla

Model: Toyota Corolla MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on a Toyota Corolla, lift the vehicle so you can loosen the bolts securing the corresponding front wheel. Once these bolts are loosened, remove the wheel to access the brake caliper at the back.

By unscrewing the fixing bolts, the caliper can be removed, allowing you to slide out the pads inside it. These should now be replaced with new parts, and then you can reassemble the removed components.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Toyota Corolla?
How to Replace the Front Brake Pads on a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) To replace the front brake pads on a Toyota Corolla, lift the car with a jack so that the corresponding wheel is off the ground. Once the car is rais…
How to Replace the Front Brake Pads on a Toyota Corolla
How to Replace the Front Brake Pads on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) This guide provides instructions on how to remove and replace the front brake pads on a Toyota Corolla in simple and quick steps. First, lift the veh…
How to Replace the Brake Disc and Pads on a Toyota Corolla
How to Replace the Brake Disc and Pads on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Let’s focus on removing a front brake disc on a Toyota Corolla. Position your car on a column lift and raise it to a comfortable height. Undo the nut…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos