Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Toyota Corolla?

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Brake pads

To replace the front brake pads on a Toyota Corolla, lift the car with a jack so that the corresponding wheel is off the ground. Once the car is raised, loosen the bolts securing the wheel to remove it and access the rear. This will allow you to unscrew the bolts holding the brake caliper and remove it, sliding out the pads inside. You can then insert the new pads and refit the caliper with its bolts.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Toyota Corolla
How to Replace the Front Brake Pads on a Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) To replace the front brake pads on a Toyota Corolla, lift the vehicle so you can loosen the bolts securing the corresponding front wheel. Once these …
How to Replace the Front Brake Pads on a Toyota Corolla
How to Replace the Front Brake Pads on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) This guide provides instructions on how to remove and replace the front brake pads on a Toyota Corolla in simple and quick steps. First, lift the veh…
How to Replace the Brake Disc and Pads on a Toyota Corolla
How to Replace the Brake Disc and Pads on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Let’s focus on removing a front brake disc on a Toyota Corolla. Position your car on a column lift and raise it to a comfortable height. Undo the nut…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos