Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Toyota Corolla 2.0 D-4D

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Timing belt

See other generations:
Video tutorial

Today's instructions will allow you to remove and replace the timing belt on the Toyota Corolla 2.0 D-4D. First, raise the vehicle and begin by removing the front right wheel and the wheel arch liner; then disconnect the serpentine belt and subsequently remove the crankshaft pulley and the timing cover, as shown in the video.

At this point, take the necessary references to remove and replace the timing belt with the new one, checking the integrity of the other timing components, following the video tutorial to the end for reassembly.


Posted on 14 February 2026 by ScegliAuto


Related tutorials

How to Time the Engine of a Toyota Corolla
How to Time the Engine of a Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) Here are the main details needed to time and replace the timing belt on a Toyota Corolla. In this case, the disassembly and replacement of the timing…
Guide to Removing the Timing Chain on a Toyota Corolla VVT-i
Guide to Removing the Timing Chain on a Toyota Corolla VVT-i
Toyota Corolla (2000-2007 / MK 2) This brief guide outlines the main steps to remove and replace the timing chain on a Toyota Corolla. To access the timing chain, you will need to rem…
How to Replace the Timing Belt on the Toyota Corolla
How to Replace the Timing Belt on the Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) To replace the timing belt on the Toyota Corolla, open the bonnet to access the components located on the left side of the engine block. Here, under …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos