Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Ignition Coil in a 2010 Toyota Corolla

Model: Toyota Corolla MK 4, E170, E160 - Years 2013-2019
Part: Ignition coil

The video shows how to replace ignition coils 1 and 2 in a 2010 Toyota Corolla in a few simple steps. This operation can be done independently. You will notice this issue when the VSC light starts flashing and the engine light comes on at the same time. Use a 10 mm socket to remove the wiring bolt before disconnecting it from the coil. Pull out coil 1. Insert the new coil 1, connect the wiring, and tighten the bolt with the socket. Follow the same procedure to replace coil 2. Start the engine to check that everything is functioning correctly.

Updated on 2 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to locate the fuse boxes and understand their diagrams in a Toyota Corolla
How to locate the fuse boxes and understand their diagrams in a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) In this tutorial, we can see how to locate the fuse boxes of a Toyota Corolla and understand their respective diagrams. One box is located inside the…
How to Reset the Service on a Toyota Corolla
How to Reset the Service on a Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) Today, let’s see how to perform the service reset on a Toyota Corolla. This operation is useful after carrying out a service, to inform the vehicle t…
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos