Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Dashboard Bulbs on Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Dashboard

See other generations:
Video tutorial

First, remove the two lower and side plastic strips from the central dashboard, as shown in the video (if it’s difficult by hand, use a plastic wedge). Then, similarly, remove the two upper strips.

Now detach the air vents and place them on top of the dashboard before removing the radio frame. Unscrew the screws located at the sides of the climate control area: this will allow you to finally remove that plastic and disconnect its connectors.

Then access from the back to extract the small bulbs and replace them with the ones you purchased. Reassemble everything in reverse order.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Toyota Corolla (2006-2013 / MK 3) In these brief and simple steps, you will learn how to dismantle and replace the rear light and its bulbs on a Toyota Corolla. First, open the boot a…
Toyota Corolla (2006-2013 / MK 3) Let's look at removing the front headlamp bulbs on a Toyota Corolla Verso. First, open the front engine compartment, locate the caps that cover the f…
Toyota Corolla (2006-2013 / MK 3) In this video, you will discover how to replace the interior dome light bulbs on the third series Toyota Corolla, as well as on the Auris. First, get…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos