Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : How to replace the brake light bulbs in a Toyota Corolla.

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Light bulb
Operation: How to replace the brake light bulbs in a Toyota Corolla.

In today's video, we will see how to replace the rear stop light bulbs in the Toyota Corolla. First, we need to get a replacement bulb, following the manufacturer's instructions. Then, we open the rear trunk hood and remove the felt cover on the side of the compartment. Next, we remove the cover and unscrew the bulb from its socket. We then replace it with the new unit and test the bulb. If everything is okay, we can proceed to reassemble the parts as they were originally and the job is done.


Posted on 20 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos