Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulbs in a Toyota Corolla?

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the brake light bulbs in a Toyota Corolla, a very simple and quick operation. First, ensure that the key is not inserted to operate safely.

Then, open the boot and remove the small panel located near the back of the headlamp. Next, grasp the brake light bulb holder, which is the one positioned higher up, and extract it from the housing by turning it anti-clockwise.

At this point, you can replace the bulb and reassemble everything by following the reverse procedure.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Light Bulbs on a Toyota Corolla
How to Replace the Brake Light Bulbs on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) In today's video, you will learn how to replace the rear brake light bulbs on a Toyota Corolla. First, obtain a replacement bulb, following the manuf…
Replacing the rear light bulbs of the Toyota Corolla
Replacing the rear light bulbs of the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Here are the instructions for removing and replacing the rear light bulbs of the Toyota Corolla. First, open the boot lid and start removing the side…
How to Identify the Fuse Diagram in a Toyota Corolla
How to Identify the Fuse Diagram in a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) The video in question shows the fuse diagrams present in a Toyota Corolla. The fuse panel located inside the vehicle's cabin includes components assi…

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos