Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the rear light bulbs of the Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

Here are the instructions for removing and replacing the rear light bulbs of the Toyota Corolla. First, open the boot lid and start removing the side trim to access the inside of the light unit; separate the bulb holder from the light assembly by unscrewing the screws and disconnecting the electrical connector for the lights, as shown in the video.

At this point, replace the faulty stop lights with new ones of the correct type and with the same fitting; reassemble the bulb holder and check the operation of the stop lights!


Posted on 6 August 2026 by ScegliAuto


Related tutorials

How to Change the Rear Light on a Toyota Corolla
How to Change the Rear Light on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) How do you remove the rear light on a Toyota Corolla? To remove the rear light, you first need to take off the cover in the boot. Lift the tailgate a…
Headlight Bulb Replacement for Toyota Corolla
Headlight Bulb Replacement for Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Are the headlight bulbs damaged? Let’s look at removing the front headlight bulbs from a Corolla. Lift the front bonnet of the car and secure it. Rem…
How to Replace the Rear Headlight Bulbs in a Toyota Corolla?
How to Replace the Rear Headlight Bulbs in a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) Replacing the rear headlight bulbs in a Toyota Corolla is a straightforward task. First, remove the plastic rivets securing the inner panel in the bo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos