Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio Block from a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car stereo

See other generations:
Video tutorial

Want to remove the radio from the Yaris? Let's look at disassembling the components of the Toyota. Remove the plastic trim on the sides of the radio by prying it off, then unscrew the screws underneath.

Once the side plastics are removed, unscrew the remaining securing screws with a screwdriver to take out the radio. Carefully pull the radio out from the centre console, ensuring not to damage the wiring.

Clean the dashboard, then connect the electrical terminals of the new radio. Secure the radio in the centre console and screw in the securing screws.

Finally, refit the covering plastics.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

Removing the Car Radio from a Toyota Yaris
Removing the Car Radio from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video tutorial, you will learn how to remove the car radio from a second-generation Toyota Yaris. First, get inside the vehicle and remove th…
Replacing the Radio in a Toyota Yaris
Replacing the Radio in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let's see how to replace the radio in the Toyota Yaris with all the covering pieces of the central dashboard. Remove the radio trim frame with a plas…
How to Remove the Car Radio on Yaris
How to Remove the Car Radio on Yaris
Toyota Yaris (1999-2005 / Xp10) Replace the car radio on your Toyota Yaris if you want to install a new one or if it is damaged. Remove the upper central plastic piece from the dash…

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos