Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Toyota Yaris 2

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car stereo

See other generations:
Video tutorial

In this video, see how to remove the radio from its housing in the Toyota Yaris and how to proceed. Remove the two vertical profiles on either side of the dashboard where the radio is located by levering with your hands, and disconnect the relevant electrical connections.

Using a screwdriver, undo the four screws on the sides of the unit and remove the upper display frame. Apply force to the top, using a plastic lever if necessary to partially release the radio, disconnect all electrical connectors, and remove the air vents from the trim.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Replace the Car Radio in a Toyota Yaris
How to Replace the Car Radio in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Replacing the car radio in a Toyota Yaris is a fairly simple task to do yourself. To perform this operation, remove the hard plastic cover around the…
Replacing the Radio in a Toyota Yaris
Replacing the Radio in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let's see how to replace the radio in the Toyota Yaris with all the covering pieces of the central dashboard. Remove the radio trim frame with a plas…
How to replace the radio in a Toyota Yaris?
How to replace the radio in a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To replace the radio in a Toyota Yaris, use a tool like a screwdriver to lever off the trim surrounding the radio and along the dashboard. Once this …

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos