Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the Console, Dashboard and Radio

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Dashboard

See other generations:
Video tutorial

To replace the original radio, the button illumination, or for any maintenance operation, this guide shows you step by step how to disassemble the entire central part of the console. First, remove the 2 side trims that each contain a button at the top by pulling them towards you, gradually from the bottom to the top, until the entire part is removed and you can disconnect the button power supply as shown in the video.

Now, remove the bezel of the speedometer by simply lifting it and pulling it towards you, and in the same way, extract the bezel that surrounds the radio and the air vents. Next, unscrew the 4 screws located at the corners of the stereo, which is now free.

Pull it out and disconnect the antenna cable. Once the new stereo is in place, reinsert the screws and reassemble everything.


Updated on 1 February 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Toyota Yaris
How to Remove the Radio from a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) How do you remove the car radio from the central dashboard? Here’s how to take off the cover plastic to access the radio. Remove the radio cover plas…
How to Remove the Radio from a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) How do you remove the radio from the Yaris? Let's see how to dismantle the radio cover plastics. Detach the trim from above the dashboard until it is…
Removing the Car Radio for Repair
Removing the Car Radio for Repair
Toyota Yaris (1999-2005 / Xp10) Start by gently pulling off the climate control knobs using just your hands. Remove the plastic frame by pulling it while simultaneously lifting it u…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos