Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio for Repair

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Car stereo

See other generations:
Video tutorial

Start by gently pulling off the climate control knobs using just your hands. Remove the plastic frame by pulling it while simultaneously lifting it upwards.

Proceed with the same operation on the plastic frame around the car radio. Next, remove the screws from the radio console and carefully lift the assembly to allow the connectors to be removed.

Once the car radio is removed, take out the screws securing the switch and gently remove it. Also, disconnect the connecting cables. Refit the new radio by reversing the operations.

Turn on the car radio to test for correct operation.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Removing the Car Radio and Air Vents
Removing the Car Radio and Air Vents
Toyota Yaris (1999-2005 / Xp10) Pull the three climate control knobs forward to remove them; unscrew the screws located beneath the first and third knobs. At this point, pull the ce…
Car Radio Removal Instructions
Car Radio Removal Instructions
Toyota Yaris (1999-2005 / Xp10) Before proceeding with the removal of the car radio, ensure you have the code for restarting it. First, remove the climate control knobs by simply pu…
Installation of iPod Connection Kit to Car Radio
Installation of iPod Connection Kit to Car Radio
Toyota Yaris (2005-2011 / Xp90) With this kit, you can connect your iPhone to the car radio. To install it, proceed as follows: starting from the bottom, unclip the side panels of t…

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos