Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Car Radio Removal Instructions

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Car stereo

Before proceeding with the removal of the car radio, ensure you have the code for restarting it. First, remove the climate control knobs by simply pulling them off; unscrew the screws located beneath the first and last knobs and unclip the entire control panel, including the car radio display and air vents. Unclip the connectors attached to the control panel to remove it, then proceed to unscrew the fixing screws of the car radio; unscrew the screws (one is located behind the ashtray) and pull the car radio forward while disconnecting the connectors attached to it.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Toyota Yaris car radio
How to replace the Toyota Yaris car radio
Toyota Yaris (2005-2011 / Xp90) Replacing the car radio on a Toyota Yaris is a fairly simple operation to perform independently. To carry out this operation, we must remove the hard…
Removing the Car Radio from a Toyota Yaris 1
Removing the Car Radio from a Toyota Yaris 1
Toyota Yaris (1999-2005 / Xp10) In this video, see the instructions for removing the original car radio from a first series Toyota Yaris, following these simple steps. First, get in…
Removing the Dashboard and Car Radio
Removing the Dashboard and Car Radio
Toyota Yaris (2005-2011 / Xp90) Using a plastic tool to avoid damaging the bodywork, lever at the sides of the climate control panel to release the plastic clips and remove it. Stil…

    Frequently Asked Questions

    • Yaris 2011-2019 - Why does the Toyota Yaris car radio not work? Read answer
    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos