Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Radio from a Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Car stereo

How do you remove the radio from the Yaris? Let's see how to dismantle the radio cover plastics. Detach the trim from above the dashboard until it is removed, then remove the radio's trim frame using a plastic lever (the securing screws are underneath) and detach it from the centre console. Once the frame is removed, unscrew the securing screws located at the sides of the radio with a screwdriver. Pull the radio out from the dashboard and disconnect the cables (power and antenna). To reassemble, reverse the disassembly steps. Turn on the radio at the end of the assembly for a test.

Updated on 16 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Toyota Yaris (1999-2005 / Xp10) Replace the radio in a Toyota Yaris if it is damaged or worn out. Let's look at the disassembly. Remove the ventilation knobs and take off the coveri…
Toyota Yaris (2005-2011 / Xp90) Replacing the car radio on a Toyota Yaris is a fairly simple operation to perform independently. To carry out this operation, we must remove the hard…
Toyota Yaris (2005-2011 / Xp90) To replace the radio in a Toyota Yaris, you need to use a tool that acts as a lever to remove the three covers of the dashboard surrounding the radio…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2011-2019 - Why does the Toyota Yaris car radio not work? Read answer
    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos