Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the internal handle of the front door of the Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Handle

See other generations:
Video tutorial

These short and simple steps will show us how to disassemble and replace the inner handle of the front door of the Toyota Aygo. First, we open the front door of the car and start removing the plastic cover of the handle; then we unscrew the fixing screws that we find on the sides of the handle, disconnecting the handle cable to remove it, as shown in the video.

At this point, we install the new inner door handle, fixing it correctly and wiring it; finally, we also reassemble the plastic cover!


Posted on 8 June 2025 by ScegliAuto


Related tutorials

Replacing the Speakers in a Toyota Aygo
Replacing the Speakers in a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) In this video tutorial, you will learn how to remove and replace the front door speaker of a Toyota Aygo, following the instructions below. First, op…
How to Remove the Door Panel on a Toyota Aygo
How to Remove the Door Panel on a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) How do you remove the door panel (driver's side) of a Toyota Aygo? Here's how to proceed with the disassembly. Before starting the disassembly work, …
How to Remove the Rear Door Trim of the Toyota Aygo
How to Remove the Rear Door Trim of the Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) In this video, see how to remove the internal trim of the doors of the Toyota Aygo (also applicable to the Peugeot 107 and Citroen C1). Start from th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos