Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear door panel of the Toyota Aygo

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Car door

In this video we can see how to remove the inner door panel of the Toyota Aygo (as well as the Peugeot 107 and Citroen C1). We start from the bottom of the plastic, pulling it towards us after levering with plastic spatulas, to detach the clips holding the parts in place. Once we have loosened the bottom part, we unscrew the two screws holding the speaker in place, and remove it. After removing the handle cover, we remove the three screws anchoring the panel at the height of the handle itself. At this point, the entire panel can be removed from the body.

Posted on 30 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear light of the Toyota Aygo
Replacement of the rear light of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Let's briefly see the instructions that will allow us to disassemble and replace the rear taillight of the Toyota Aygo, in simple steps. First, we op…
Replacement of the rear headlight bulbs of the Toyota Aygo
Replacement of the rear headlight bulbs of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) The steps outlined in this guide will show us how to disassemble and replace the rear headlight bulbs of the Toyota Aygo. First, we open the rear hat…
…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos