|
Do it yourself
| |||
| ||||
How to fix the trunk that won't open on the Toyota Aygo, Citroen C1, and Peugeot 108
Model: Toyota Aygo
MK 1, Ab10
- Years 2005-2014
In this video, we can see how to open the trunk of the Toyota Aygo (also of the Citroen C1 and the Peugeot 108, which are essentially the same car) that is stuck. From inside the trunk, we need to remove all the plastic coverings, and then remove the safety caps, lifting the lid with a slight lever. This will expose the mechanism, and we can open the trunk, which still does not open from the outside; the reason is that when we press the external button, the plastic lever does not grip the metal one to activate the opening of the tailgate. Aligning the two levers only worked for a short time, so we had to change the entire mechanism, which is expensive when new, so it is better to look at a dismantler or online searching for used parts. We need to remove the two fixing bolts, and it will be necessary to move the rear bumper a bit to remove it and then put it back in place.
Posted on 18 November 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota Aygo
(2014-2023 /
Ab40, MK 2)
In today's video, we will see how to turn off the tyre pressure monitoring system warning light in the second generation Toyota Aygo. This tutorial a…
Toyota Aygo
(2014-2023 /
Ab40, MK 2)
Below we will see the main directions that will allow us to disassemble and replace the clutch kit of the Toyota Aygo, as well as of the Citroen C1 a…
Toyota Aygo
(2014-2023 /
Ab40, MK 2)
To open the boot of a Toyota Aygo, it is not enough to press the button or pull the lever located at the bottom of the tailgate: you must also insert…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.181
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |