Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear headlight bulbs of the Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

The steps outlined in this guide will show us how to disassemble and replace the rear headlight bulbs of the Toyota Aygo. First, we open the rear hatch of the trunk and begin to remove the side panel, thus accessing the rear part of the headlight; we then unscrew the nuts and disconnect the electrical connector of the bulbs to remove the headlight, as shown in the video.

At this point, we separate the bulb holder from the bulbs, replacing any faulty bulbs with new ones (having the same fitting); finally, we reassemble the rear headlight!


Posted on 18 January 2025 by ScegliAuto


Related tutorials

How to replace the rear lights of the Toyota Aygo
How to replace the rear lights of the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) In a few simple steps, we will see the process of disassembling and replacing the rear headlight bulbs of the Toyota Aygo. First, open the rear trunk…
How to Replace the Rear Light Bulbs on a Toyota Aygo
How to Replace the Rear Light Bulbs on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Do you need to replace the rear light bulbs on a Toyota Aygo? In this video, see how to replace them: open the boot lid, unscrew the screws located a…
How to Remove the Rear Light and Its Bulbs on the Toyota Aygo
How to Remove the Rear Light and Its Bulbs on the Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) By following these brief and simple steps, you will learn how to remove and replace the rear light and its bulbs on the Toyota Aygo. First, open the …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos