Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the headlight bulb of the Toyota Aygo?

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Headlight bulb

It will be possible to replace the headlight bulb of the Toyota Aygo by opening the hood to access the components located inside the engine compartment: here you will be able to locate the internal cover panel of the headlight assembly that needs to be removed in order to access the bulb. This can now be disconnected from the connector so that the new one can be inserted after it has been connected, of course: once the installation is complete, you can close the headlight again to check that everything is functioning.

Posted on 16 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Toyota Aygo
How to Replace the Front Headlamp Bulb on a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) To replace the front headlamp bulb on a Toyota Aygo, open the bonnet to access the components in the engine bay. Locate the internal protective cover…
How to Replace the Front Headlight Bulb on the Toyota Aygo
How to Replace the Front Headlight Bulb on the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) In this short and simple guide, you will learn how to remove and replace the front headlight bulb (dipped and main beam) on the Toyota Aygo. First, o…
How to Replace the Front Headlamp Bulb on a Toyota Aygo
How to Replace the Front Headlamp Bulb on a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) Replacing the front headlamp bulb on your Toyota Aygo is a very simple, quick, and intuitive procedure. First, switch off the vehicle, pull the handb…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos