Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Headlight bulb

Toyota Aygo - Headlight bulb

Toyota Aygo (2005-2014 / Ab10, MK 1)
How do you replace the front headlight bulb of the Toyota Aygo?
In order to replace the front headlight bulb of the Toyota Aygo, you need to open the hood so that you can access the components located inside the engine …read all…
Posted on 9 September 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the front headlight bulb of a Toyota Aygo.
In this short and simple guide, we will see how to disassemble and replace the headlight bulb (low beam and high beam) of the Toyota Aygo. First, we open the …read all…
Posted on 11 April 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the Toyota Aygo headlight bulb?
To replace the headlight bulb (for example the H4 type bulb), open the bonnet, identify the headlight and the relative bulb to be replaced, put your hand …read all…
Posted on 21 November 2022 by ScegliAuto
Toyota Aygo (2014-2023 / Ab40, MK 2)
How to replace the Toyota Aygo headlight blade
The procedure for replacing the headlight bulb of your Toyota Aygo is a very simple, quick and intuitive procedure. Simply turn off the vehicle, pull the …read all…
Posted on 2 May 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
Replacing the front bulbs on Toyota Aygo
When working with the engine off and the handbrake applied, raise the hood and secure it. To replace the high beam, disconnect the connector and unscrew the …read all…
Posted on 16 March 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace Toyota Aygo position bulb
Replacing the headlight sidelight bulb of the Toyota Aygo (which shares chassis and engine with its French sisters C1 and 107) is very easy to do and there is …read all…
Posted on 24 September 2023 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos