Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Clutch

Toyota Aygo - Clutch

Toyota Aygo (2005-2014 / Ab10, MK 1)
How do you replace the clutch of the Toyota Aygo?
In order to replace the clutch of the Toyota Aygo, you need to lift the car so that you can loosen the bolts that secure the front wheels, removing them …read all…
Posted on 19 February 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the clutch of the Toyota Aygo 1.0 VVT-I.
Below we will see the procedure and instructions that will allow us to dismantle and replace the clutch kit of the Toyota Aygo. First of all, we lift the car …read all…
Posted on 28 October 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the clutch plates of the Toyota Aygo
Let's find out in this guide the main steps that will allow us to remove and replace the clutch plates of the Toyota Aygo, in simple and quick steps. First we …read all…
Posted on 30 April 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
Clutch disc replacement
Replacing the clutch is a very laborious operation as it is necessary to disassemble the entire clutch unit. Start by removing the battery and holder so that …read all…
Posted on 13 July 2023 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos