Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you adjust the clutch pedal of the Toyota Aygo?

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Clutch

In order to adjust the clutch pedal of the Toyota Aygo, you need to open the hood so that you can access the components located inside the engine compartment: in the area between the gearbox and the flywheel, you will find the clutch cable. Its end will have a ring, which can be loosened or tightened to adjust the clutch intensity: by tightening the ring, the pedal will become harder, while loosening the ring will make the pedal softer. Once the adjustment is done, you can close the hood again.

Posted on 15 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the clutch pedal of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Today's instructions will allow us to adjust the pedal and clutch cable of the Toyota Aygo, as well as the Peugeot 107 and Citroen C1. First, we open…
How to adjust the clutch pedal of the Toyota Aygo - Citroen C1 - Peugeot 108
How to adjust the clutch pedal of the Toyota Aygo - Citroen C1 - Peugeot 108
Toyota Aygo (2014-2023 / Ab40, MK 2) The instructions below will show us how to adjust the clutch pedal of the Toyota Aygo, in simple steps. First, we get on board the car and start chec…
Guide to replacing the clutch of the Toyota Aygo
Guide to replacing the clutch of the Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) Below we will see the main directions that will allow us to disassemble and replace the clutch kit of the Toyota Aygo, as well as of the Citroen C1 a…

Other guides you may be interested in

    Frequently Asked Questions

    • Aygo 2014-2023 - How much does it cost to replace the clutch in a Toyota Aygo? Read answer
    • Aygo 2005-2014 - How much does it cost to replace the Toyota Aygo clutch? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos