Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : License plate light

Toyota Aygo - License plate light

Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the license plate light on the Toyota Aygo?
In this tutorial, we can see how to replace the license plate light on the Toyota Aygo, an extremely simple and quick operation. First of all, make sure that …read all…
Posted on 2 November 2023 by ScegliAuto
Toyota Aygo (2014-2023 / Ab40, MK 2)
How to replace Toyota Aygo license plate lights
Let's find out below the guide that will allow us to disassemble and replace the Toyota Aygo license plate lights, by following these simple steps. First of …read all…
Posted on 10 May 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to change the Toyota Aygo license plate bulb
To replace the license plate light bulb in the Toyota Aygo (but the procedure is the same for the Peugeot 107 and the Citroen C1) it is first of all necessary …read all…
Posted on 24 October 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace license plate light on a Toyota Aygo
Let's see in this short but detailed video how to remove a license plate light from our Aygo. Let's get a slotted screwdriver and insert it around the …read all…
Posted on 28 September 2023 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos