Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Aygo
  6. : Headlight

Toyota Aygo - Headlight

Toyota Aygo (2005-2014 / Ab10, MK 1)
How do you remove the front headlight of the Toyota Aygo?

The procedure for removing the front headlight on the Toyota Aygo involves first completely removing the front bumper by unscrewing its respective fixing …read all…
Posted on 22 November 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the front headlight of the Toyota Aygo?

At the beginning of the video, we are shown a list of all the tools needed to replace the front headlight of the Toyota Aygo first model. Let's gather all of …read all…
Posted on 19 July 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How do you remove the front headlight of the Toyota Aygo?

To remove the front headlight of the Toyota Aygo, you first need to loosen the screws that secure the front bumper of the car. These screws are located in the …read all…
Posted on 8 April 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the front light clusters of the Toyota Aygo

In order to be able to easily change the headlight, first of all you need to lift your car safely. Remove the cover from underneath which protects the engine …read all…
Posted on 29 April 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to remove the Toyota Aygo headlight?

In order to remove the Toyota Aygo headlight, you need to remove the front bumper of the car, unscrewing the fixing screws that are located in the lower part …read all…
Posted on 30 September 2022 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to disassemble the front light of the Toyota Aygo

Today we will see, in this video tutorial, how to disassemble and replace the front light of the Toyota Aygo, in simple and quick steps. First of all, we open …read all…
Posted on 16 May 2024 by ScegliAuto
Toyota Aygo (2014-2023 / Ab40, MK 2)
How do you remove the Toyota Aygo headlight?

Removal of the Toyota Aygo headlight is done by first removing the bumper completely by unscrewing its fixing screws. These screws are located at the bottom …read all…
Posted on 4 May 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the Toyota Aygo bulbs and in particular the low beam bulbs

The guide shows how to replace the Toyota Aygo bulbs, especially the H4 low beam bulbs. To replace it, simply open the bonnet after having secured the vehicle, …read all…
Posted on 28 February 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to remove the headlight of a Toyota Aygo

Before we begin, we will need to open the front hood of our Toyota Aygo. So let's start by disassembling and removing the front bumper, simply by unscrewing …read all…
Posted on 1 February 2024 by ScegliAuto

Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos