Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight of the Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Headlight

The instructions in this guide will show us how to disassemble and replace the front headlight of the Toyota Aygo. First, we open the hood of the car and start unscrewing all the fixing screws of the headlight that we find on the top part; then we disconnect the electrical connector of the bulbs, thus removing the optical group, as shown in the video. At this point, if necessary, we replace only the bulbs or the entire headlight, connecting it and fixing it on the bodywork; if necessary, we also adjust the height of the front headlight, thus adjusting the beam of light.

Posted on 15 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight of a Toyota Aygo
How to Remove the Front Headlight of a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Before you start, open the bonnet of your Toyota Aygo. Begin by removing the front bumper by unscrewing the relevant screws and bolts, then unclip th…
Replacement of the front headlight bulb of the Toyota Aygo
Replacement of the front headlight bulb of the Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) These short and simple steps will show us the procedure for disassembling and replacing the low beam bulb of the front headlight of the Toyota Aygo. …
Replacement of the front headlight bulb of the Toyota Aygo
Replacement of the front headlight bulb of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Today we will see the necessary instructions to remove and replace the headlight bulb of the Toyota Aygo. First, we open the hood of the car and star…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos