Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the front headlight bulb of the Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Headlight bulb

Today we will see the necessary instructions to remove and replace the headlight bulb of the Toyota Aygo. First, we open the hood of the car and start by removing the bulb protection cap, disconnecting the electrical connector of the low beam bulb; then we disconnect the metal clip to remove the bulb, as shown in the video. At this point, we install the new low beam/high beam bulb (in this case with an H4 fitting); we check the operation of the bulb before reassembling the bulb protection!

Posted on 23 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Aygo (2014-2023 / Ab40, MK 2) These short and simple steps will show us the procedure for disassembling and replacing the low beam bulb of the front headlight of the Toyota Aygo. …
Toyota Aygo (2005-2014 / MK 1, Ab10) In this short and simple guide, you will learn how to remove and replace the front headlight bulb (dipped and main beam) on the Toyota Aygo. First, o…
Toyota Aygo (2005-2014 / MK 1, Ab10) Replacing the position bulb in the front headlamp of the Toyota Aygo (which shares its chassis and engine with the French siblings C1 and 107) is ver…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos