Do it yourself
Frequently asked questions about cars and motorcycles

How to change the light bulb in the Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Light bulb

In this video tutorial you can see how you can replace the Toyota Aygo bulb, following a few simple steps that will guide you step by step towards the correct management of your vehicle. First secure the vehicle, then work in a quiet place, turn off the car and set the handbrake. The Toyota Aygo is fitted with BOLK h4 12V bulbs. To make the bulbs last longer, I advise you not to touch them with your fingers. Pull the lever and lift the bonnet and secure it with the special rod; now remove the electrical connector of the light bulb, pulling it towards you; remove the rubber cover from around the bulb. To remove the bulb you have to push and at the same time push to the right to detach the tab that supports it, turn the hook downwards and then detach the bulb. At this point, mount the new bulb and put all the parts back in place.


Posted on 20 July 2024 by ScegliAuto



How to change the Toyota Aygo license plate bulb
Toyota Aygo (2005-2014 / MK 1, Ab10) To replace the license plate light bulb in the Toyota Aygo (but the procedure is the same for the Peugeot 107 and the Citroen C1) it is first of all
How to replace the license plate light on the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) In this tutorial, we can see how to replace the license plate light on the Toyota Aygo, an extremely simple and quick operation. First of all, make s
How to change the rear light bulb of the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) The procedure for replacing the rear light bulb in the Toyota Aygo is pretty simple. We open the trunk of the car and remove the fasteners and screws

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos