Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Indicator Bulb on a Toyota Aygo

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Side marker bulb

Today, we will discover the steps and instructions to remove and replace the side indicator bulb on a Toyota Aygo. First, move to the side and carefully pry the side of the indicator light without damaging the bodywork to detach it; disconnect the electrical connector of the indicator and separate the bulb holder from the light unit, removing and replacing the bulb with a new one (with the same fitting). At this point, reattach the light unit to the bodywork, checking its correct operation.

Posted on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Toyota Aygo
How to Replace the Front Headlamp Bulb on a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) Replacing the front headlamp bulb on your Toyota Aygo is a very simple, quick, and intuitive procedure. First, switch off the vehicle, pull the handb…
How to Replace the Position Bulb on a Toyota Aygo
How to Replace the Position Bulb on a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Replacing the position bulb in the front headlamp of the Toyota Aygo (which shares its chassis and engine with the French siblings C1 and 107) is ver…
How to Replace the Front Headlamp Bulb on a Toyota Aygo
How to Replace the Front Headlamp Bulb on a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) To replace the front headlamp bulb on a Toyota Aygo, open the bonnet to access the components in the engine bay. Locate the internal protective cover…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos