Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting an Armrest on a Toyota Aygo X

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Body

In this video, you will see how to fit a central armrest on a Toyota Aygo X without drilling. You can find these specific armrests for the Toyota Aygo X at braccioli-italy-armrests.com. Use the internal search to find your vehicle and choose between two types: one with adjustable length, as shown in the video - costing £102.50 - or the fixed option at £99.00. The armrest has a spacious compartment for storing small items. For installation, remove the screw located under the cup holder, place the armrest on this component, and screw in the provided screw. Job done!

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Toyota Aygo 2
How to replace the cabin air filter of the Toyota Aygo 2
Toyota Aygo (2014-2023 / Ab40, MK 2) In the following guide, we will help you complete the replacement of the air filter inside the cabin of your Toyota Aygo second edition. First of all…
How to Disconnect the Radio from Toyota Aygo
How to Disconnect the Radio from Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) How do you remove the radio from your Aygo? Let's look at the removal of the radio and the installation of the new one in the Toyota Aygo. Remove the…
Where is the OBD2 port located in the Toyota Aygo?
Where is the OBD2 port located in the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) The following video tutorial shows us the location of the OBD2 port on a Toyota Aygo vehicle. On Aygo vehicles, the port is installed inside the cabi…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos