Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on the Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

In this short and simple guide, you will learn how to remove and replace the front headlight bulb (dipped and main beam) on the Toyota Aygo. First, open the bonnet of your car and start by removing the plastic protection cap of the bulb; then disconnect the electrical connector of the bulb and unclip the metal spring to remove it from the headlamp unit, as shown in the video.

At this point, install the new bulb of the correct type with the same fitting (in this case, type H4); refit and reconnect the bulb to the front headlight!


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How do you replace the headlight bulb of the Toyota Aygo?
How do you replace the headlight bulb of the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) It will be possible to replace the headlight bulb of the Toyota Aygo by opening the hood to access the components located inside the engine compartme…
Replacement of the front headlight bulb of the Toyota Aygo
Replacement of the front headlight bulb of the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Today we will see the necessary instructions to remove and replace the headlight bulb of the Toyota Aygo. First, we open the hood of the car and star…
How to Replace the Front Headlight Bulb on the Toyota Aygo?
How to Replace the Front Headlight Bulb on the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) To replace the front headlight bulb (for example, an H4 bulb), open the bonnet, locate the headlight and the corresponding bulb to be replaced, reach…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos