Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on the Toyota Aygo?

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlight bulb (for example, an H4 bulb), open the bonnet, locate the headlight and the corresponding bulb to be replaced, reach behind the headlight assembly, disconnect the electrical connector, and pull off the rubber cover behind the bulb.

Then, unclip the bulb retaining spring by pushing it, and at this point, you can remove the bulb.

Take the new bulb and insert it into the headlight, ensuring correct orientation for the electrical contact. Finally, reattach the spring, reposition the rubber cover, and reconnect the connector.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on the Toyota Aygo
How to Replace the Front Headlight Bulb on the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) In this short and simple guide, you will learn how to remove and replace the front headlight bulb (dipped and main beam) on the Toyota Aygo. First, o…
How do you replace the headlight bulb of the Toyota Aygo?
How do you replace the headlight bulb of the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) It will be possible to replace the headlight bulb of the Toyota Aygo by opening the hood to access the components located inside the engine compartme…
Replacement of the front headlight bulb of the Toyota Aygo
Replacement of the front headlight bulb of the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Today we will see the necessary instructions to remove and replace the headlight bulb of the Toyota Aygo. First, we open the hood of the car and star…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos