Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlights on a Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Headlight

In this tutorial, we will see how to remove the front headlights on a Toyota Aygo, a very simple and quick operation. First, ensure that the instrument cluster is off, then open the bonnet, remove the clips located at the top of the bumper, and unscrew the various bolts using a 10mm socket. Next, remove the clips accessible from inside the wheel arch, unscrew the lower bolts, and separate the bumper from the frame. At this point, simply unscrew the bolts of the headlights, disconnect the power connectors, and remove them from their housing.

Posted on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlights in the Toyota Aygo?
How to replace the front headlights in the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) In this tutorial, we can see how to replace the front headlights in the Toyota Aygo, a very simple and quick operation. First of all, make sure that …
Where are the fuses located in the Toyota Aygo?
Where are the fuses located in the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) All the fuses in the Toyota Aygo are contained within the designated fuse boxes located inside the vehicle: there are two in this type of vehicle, on…
Where to Find the Fuses on a Toyota Aygo
Where to Find the Fuses on a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) On board the Toyota Aygo, each fuse is located within one of the dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse box…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos