Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure monitoring system of the 2020 Toyota Aygo

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Instrument cluster

If you want to manually reset the tire pressure warning light that keeps appearing on the instrument panel of your 2020 Toyota Aygo Mk2 even in the absence of a puncture, then all you have to do is follow the following procedure. First of all, you need to go inside the car and make sure the instrument panel is on. Then, move to the passenger side and open the glove compartment in front of you. Finally, locate the small "Set" button and hold it down until the tire pressure warning light turns off permanently.

Posted on 12 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Toyota Aygo (2014-2023 / Ab40, MK 2) To reset the tire pressure light on a Toyota Aygo, start by locating the reset button, which is found in the front passenger side glove box. Turn on …
Toyota Aygo (2014-2023 / Ab40, MK 2) The button to reset the tyre pressure warning light on the Toyota Aygo is located inside the glove compartment. Once opened, you should be able to lo…
Toyota Aygo (2021-2026 / MK 3, Aygo X) The activation of the tire pressure warning light indicates a possible puncture in one or more tires; let's see how to reset the TPMS sensors on the …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos