Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake pads

See other generations:
Video tutorial

Today, we will see in this guide how to remove and replace the front brake pads on a Toyota Aygo by following these simple steps. First, lift the vehicle and begin removing the front wheel; then unscrew the fixing bolts located on the brake caliper at the back to remove it from the disc, as shown in the video.

At this point, remove the old brake pads and replace them with new ones of the correct type; clean the caliper of any residual dirt and reassemble everything, following the video tutorial to the end!


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Replacing Brake Pads on a Toyota Aygo
Replacing Brake Pads on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Loosen the wheel bolts on the wheel you will be working on, lift the car, and remove the wheel. Use a crowbar to separate the brake pads. With a wire…
Replacing Brake Pads on the Toyota Aygo
Replacing Brake Pads on the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Replacing the brake pads is a maintenance task that can easily be done DIY; before lifting the vehicle, loosen the wheel fastening bolts to complete …
How to Change the Front Brake Pads on a Toyota Aygo
How to Change the Front Brake Pads on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Here’s how to change the front brake pads on the Toyota Aygo: open the brake fluid reservoir; this will help the pistons retract into the caliper. Wi…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos