Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads on a Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake pads

See other generations:
Video tutorial

Loosen the wheel bolts on the wheel you will be working on, lift the car, and remove the wheel. Use a crowbar to separate the brake pads.

With a wire brush and WD-40 spray, clean the brake mounting elements. Unscrew the brake caliper attachment with a 13mm ratchet and socket.

Remove the caliper and then the pads. Remove the pad clips using the crowbar again.

Install the new clips and apply anti-squeal paste on the surface where the pads will go. Using a specific rewind tool, press the brake piston back. Reassemble everything in reverse order.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Toyota Aygo
How to Replace the Front Brake Pads on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Today, we will see in this guide how to remove and replace the front brake pads on a Toyota Aygo by following these simple steps. First, lift the veh…
Replacing Brake Pads on the Toyota Aygo
Replacing Brake Pads on the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Replacing the brake pads is a maintenance task that can easily be done DIY; before lifting the vehicle, loosen the wheel fastening bolts to complete …
How to replace the front brake discs on a Toyota Aygo1
How to replace the front brake discs on a Toyota Aygo1
Toyota Aygo (2005-2014 / Ab10, MK 1) In this video we see how to replace the brake discs on a Toyota Aygo 1: we open the hood and unscrew the cap of the brake fluid reservoir, lift the f…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos