Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads on the Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Brake pads

Replacing the brake pads is a maintenance task that can easily be done DIY; before lifting the vehicle, loosen the wheel fastening bolts to complete the removal once lifted; at this point, unscrew the fastening bolts of the brake caliper to remove it from its bracket, then extract the old pads and the associated sliding plates, clean the bracket before inserting the new sliding plates and pads, applying copper grease; then push back the brake caliper piston using the appropriate tool (a pair of adjustable pliers will also work) before refitting it onto the bracket and finally installing the wheel, tightening the bolts after lowering the vehicle to the ground.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Toyota Aygo
How to Replace the Front Brake Pads on a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Today, we will see in this guide how to remove and replace the front brake pads on a Toyota Aygo by following these simple steps. First, lift the veh…
Replacing Brake Pads on a Toyota Aygo
Replacing Brake Pads on a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Loosen the wheel bolts on the wheel you will be working on, lift the car, and remove the wheel. Use a crowbar to separate the brake pads. With a wire…
How to replace the front brake discs on a Toyota Aygo1
How to replace the front brake discs on a Toyota Aygo1
Toyota Aygo (2005-2014 / MK 1, Ab10) In this video we see how to replace the brake discs on a Toyota Aygo 1: we open the hood and unscrew the cap of the brake fluid reservoir, lift the f…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos