Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlights of the Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

To easily change the front headlight, first, securely lift your car. Remove the cover that protects the front of the engine from mud and stones. With the bonnet open, remove the upper part of the wheel arch liners.

Now you can remove the front panel, using moderate force to avoid damage. At this point, you can free the headlight units by unscrewing the side screw and the two on the top. Remove the four electrical connectors, which you should clean thoroughly.

In the video, they replace the entire headlight unit. The two headlight units cost around £140.00 on major e-commerce platforms.

Now, simply reconnect the connectors, reposition the headlight unit in its housing by screwing its screws back in, reattach the front panel from the top and bottom, and lower the vehicle. The job is complete.


Updated on 8 July 2026 by ScegliAuto


Related tutorials
…
How to Replace the Headlights on a Toyota Aygo?
How to Replace the Headlights on a Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) In this tutorial, you will see how to replace the headlights on a Toyota Aygo, a very simple and quick operation. First, ensure that the key is not i…
Replacing Front Speakers on Toyota Aygo
Replacing Front Speakers on Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) The standard speakers in the Toyota Aygo are not of great quality: simply raising the volume above level 20 causes them to crackle, so it is advisabl…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos