Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Brake rotors

Toyota Aygo - Brake rotors

Brake Rotors Toyota Aygo (2005-2014 / mk 1, ab 10)

Toyota Aygo (2005-2014 / MK 1, Ab10)
How to replace the front brake discs on a Toyota Aygo1
In this video we see how to replace the brake discs on a Toyota Aygo 1: we open the hood and unscrew the cap of the brake fluid reservoir, lift the front of …Read all…
Posted on 5 April 2025 by ScegliAuto
Airbag (2) Speaker (4) Shocks (4) Antenna (1) Car stereo (9) Battery (6) Transmission (4) Spark plugs (6) Body (5) Key (12) Timing belt (2) V-belt (4) Onboard computer (4) Checks and maintenance (21) Dashboard (1) Brake rotors (1) Headlight (16) Tail light (12) Fog lights (1) Air filter (12) Cabin air filter (11) Oil filter (2) Parking brake (1) Clutch (7) Light bulb (1) Side marker bulb (1) Headlight bulb (12) Tail light bulb (11) Antifreeze coolant (1) Instrument panel light (1) License plate light (5) Handle (1) Exhaust muffler (3) Starter motor (1) Engine oil (3) Clock (21) Door trim panel (4) Windshield (1) Front bumper (4) Rear bumper (4) Brake pads (4) Shift knob (2) Car door (1) Instrument cluster (3) Fuse box (34) Seat (2) Crankshaft position sensor (1) Side mirror (9) Warning light – error code (4) (30) Tire pressure warning light (19) Service warning light (23) Fuel cap (9) Windshield wipers (5) Tie rods (1) Valve (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos